With security cameras get more sophisticated, so do methods used to circumvent them with options like signal jammers. Such gadgets are specifically designed to incapacitate or take advantage of devices that use wireless wifi bluetooth jammer such as cellular, Wi-Fi, and more.

When connected only through a Wi-Fi network, each of these products can effectively be disabled when a malicious intruder comes equipped with a signal jammer. Such devices are not necessarily common in most home or business invasion crimes, but not rare, with a recent example being suspected in a burglary in San Jose, California. However, not just with the big-name brands shown above, signal jammers can affect the most sophisticated motion detection and night vision cameras when connected to a security network through a wireless connection like Wi-Fi.

So when choosing a suitable jammer, what should you pay attention to when using it?

First, find the most suitable installation location for the device. If it is a device with an external antenna, you generally need to manually install all the antennas according to the corresponding positions, and ensure that the antenna faces the area that needs to be shielded. There should be no space between the antenna and the antenna. Cross, keep parallel to each other

Second, the best height of equipment installation should be kept above 1.5 meters. Do not place the equipment on the ground, or on top of the air conditioner, or in the corner, otherwise the shielding effect will be affected.

Third, after the device is turned on and used, there should be no obstruction at the front end. It is best not to use the shield across the room, because the effect of the shield will be attenuated when passing through the wall, and the effect will be greatly reduced.

Fourth, during the working process of the device, do not cover anything. For example, someone covers the device with a piece of cloth, plastic paper, or newspaper to prevent dust, which will affect the normal heat dissipation of the device and cause the device to overheat. High, burn out internal components.

Fifth, when the device does not need to be used, shut down and unplug the power supply in time to allow the device to take a sufficient rest, which can prolong the service life of the device.