- Brand : HP Adapter
- Type : GSB099
- Capacity : 100-240V 2.9A 50-60Hz
- Voltage : 19.5V 10.3A 200W
- Encoding : HPQ17177
HSTNN-CA24 Alternate with the following models：
608431-002 609945-001 HSTNN-CA16 HSTNN-DA16 ADP-200CB_BA 608431-001 677764-002 693708-001 644698-002 645154-001 HSTNN-CA24 UP/N:A200A05DL NSW25233 F122461328000212 TPN-DA10 L00818-850 L00895-003 ADP-200HB_B TPN-CA03 815680-002 835888-001
The product HP HSTNN-CA24 is perfectly compatible with the product model HP Zbook 15 17 608431-002 609945-001 :
Hp Elitebook 8560w 8570w 8740w 8760w 8770w
HP Zbook 15 17, 15 G2 17 G2 Workstaion
OMEN by HP Laptop 15-CE009TX
OMEN by HP 15-ce062tx
HP OMEN 15-ce056na Gaming Laptop i7 7700HQ GTX 1060
OMEN by HP 15-ce002ng Gaming Notebook i7-7700HQ GTX 1060
Note: Not all compatible model# is listed.
Package Included:
1* one AC Adapter
2* one Cord Cable(US EU AU UK FOR YOUR CHOOSE)
http://pc-laptop.co/hp-power_supply-HSTNN-CA24-p179744.htm
Maintenance and instructions for the HP HSTNN-CA24 adapter:
1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.
You may also want to see this adapter:
Thunderobot PA-1181-76 19.5V 9.23A
FPS GM85-120700-D 12V/12.3V 7A 86W
DELL HA60NM200 5.0V 3.0A
ASUS ADP-200JB-D 20V 10A 200W
RAZER ADP-180TB-F 19.5V 9.23A, 180W
MSI A20-240P2A
MSI A21-100P1A 5.0V 3.0A
RAZER A15-180P1A 19.5V--9.23A
LG EAY65895901 20.0V 3.25A MAX: 65.0W, 5.0V 3.0A 15.0W, 9.0V 3.0A 27.0W, 15.0V 3.0A 45.0W (ref to the picture).
DELTA ADP-65JH 19V 3.42A
MSI A18-280P1A 20V 14A 280W
Chicony A14-150P1A 19V 7.7A/7.89A, 150W
